8 Comments

  • But, Ann, isn’t that first graph just plain dishonest? I know Tufte would say that, and Cairo comes close to that in his new book.

  • Chris Ganowski says:

    I don’t think the first graph is dishonest. If the axis didn’t start at zero, then yes, it would be dishonest. If it started at 8% for example, then category D would be disproportionally smaller than the rest (all the categories would be disproportionate to their true values). But since the axis starts at zero, having it end anywhere below the potential maximum, simply makes all the categories larger, but proportionally correct. i.e. in both examples above, category A is about 3 times larger than category D. The proportion of the bars doesn’t change, just the size.

    • Andy Ferguson says:

      It could be argued that for a percentage figure, the proportions of the white space are just as important, in which case the first graph is dishonest.
      Fundamentally though I think it’s a question of context. If 100% is a realistic target / expectation (eg election turnout), then having anything other than a “full” axis is dishonest, while if it’s always something that will be lower values (eg election results by party) then a proportionate axis would seem entirely legitimate.
      Even when 100% is still achievable, as Ann says we can control the message by changing the axis from 30% (against which 26% looks TOO good) to 50%, so that we can focus attention on the 26% without creating depression all around. It doesn’t have to be 30% or 100% – there are points in between!

    • Ann K. Emery says:

      Andy – Great logic. I’m trying to get more people to think carefully like you’re doing here rather than just going with whatever minimum and maximum values that their software program randomly gives them.

  • […] I’ve been showing you one tip at a time, like deciding how far you’ll stretch your scale, whether you’ll use a regular or stacked chart, and whether your chart will be oriented […]

  • Leave a Reply to Ann K. Emery | Removing Redundancies from My Old Graphs Cancel reply

    Your email address will not be published. Required fields are marked *

    The Graph’s Scale: Actual Maximum Value or Potential Maximum Value?

    Updated on: Jan 3rd, 2017
    Data Visualization
    , , , ,
    Emery Analytics - Bar chart axis extends just past the actual maximum value

    Fine-tune your graphs by discussing this question with your colleagues: should our graph’s axes extend to the dataset’s actual maximum value or to the potential maximum value?

    Option A: Axis stretches just past the actual maximum value (30% in this example)

    The biggest number is 26%, and the axis goes from 0% to 30%, just past the biggest number in the bunch. Your stakeholders will think the 26% looks enormous because it stretches all the way across the screen. Wow, look at our numbers! Great news! Of course, we’ll have to work on Category D, but we can certainly improve that number! Especially when the other categories are looking so good! Talk to your teammates: is this the message we’re going for?
    Emery Analytics - Bar chart axis extends just past the actual maximum value
    Option B: Axis stretches all the way to the potential maximum value (100% in this example)

    What if the numbers have the potential to stretch all the way to 100%? (The percentage of attendees who said they’d recommend your conference to a colleague, the percentage of students who graduated on time, and so on.) If you’re trying to hit 100%, now the 26% isn’t looking so hot. Argh. We thought everything was going so well! We’ve got so much to improve upon. Where do we even start?! Ask your teammates: is this the right time to risk overwhelming the stakeholders with so much bad news?Emery Analytics - Axis stretches to potential maximum value
    My advice: Good facilitation skills are an ingredient of good data visualization. I often begin with the first graph to avoid scaring stakeholders away from action. As we get to know each other  — and they get to know their numbers — I slowly introduce the second style.
    When choosing minimum and maximum axis values, what other factors do you consider?

    Download the template.

    More about Ann K. Emery
    Ann K. Emery is a sought-after speaker who is determined to get your data out of spreadsheets and into stakeholders’ hands. Each year, she leads more than 100 workshops, webinars, and keynotes for thousands of people around the globe. Her design consultancy also overhauls graphs, publications, and slideshows with the goal of making technical information easier to understand for non-technical audiences.

    8 Comments

  • But, Ann, isn’t that first graph just plain dishonest? I know Tufte would say that, and Cairo comes close to that in his new book.

  • Chris Ganowski says:

    I don’t think the first graph is dishonest. If the axis didn’t start at zero, then yes, it would be dishonest. If it started at 8% for example, then category D would be disproportionally smaller than the rest (all the categories would be disproportionate to their true values). But since the axis starts at zero, having it end anywhere below the potential maximum, simply makes all the categories larger, but proportionally correct. i.e. in both examples above, category A is about 3 times larger than category D. The proportion of the bars doesn’t change, just the size.

    • Andy Ferguson says:

      It could be argued that for a percentage figure, the proportions of the white space are just as important, in which case the first graph is dishonest.
      Fundamentally though I think it’s a question of context. If 100% is a realistic target / expectation (eg election turnout), then having anything other than a “full” axis is dishonest, while if it’s always something that will be lower values (eg election results by party) then a proportionate axis would seem entirely legitimate.
      Even when 100% is still achievable, as Ann says we can control the message by changing the axis from 30% (against which 26% looks TOO good) to 50%, so that we can focus attention on the 26% without creating depression all around. It doesn’t have to be 30% or 100% – there are points in between!

    • Ann K. Emery says:

      Andy – Great logic. I’m trying to get more people to think carefully like you’re doing here rather than just going with whatever minimum and maximum values that their software program randomly gives them.

  • […] I’ve been showing you one tip at a time, like deciding how far you’ll stretch your scale, whether you’ll use a regular or stacked chart, and whether your chart will be oriented […]

  • Leave a Reply to Ann K. Emery | Removing Redundancies from My Old Graphs Cancel reply

    Your email address will not be published. Required fields are marked *

    You Might Like

    Our complimentary mini course for beginners to dataviz. Takes 45 minutes to complete.

    Enroll

    3 Simple Steps that Took My Graph from Good to Great

    Maia Werner-Avidon shares an excellent example of grouping by color, white space, and icons. You’ll love her call-out annotations to help readers understand the graph, too.

    More »

    Inside our flagship dataviz course, you’ll learn software-agnostic skills that can (and should!) be applied to every software program. You’ll customize graphs for your audience, go beyond bar charts, and use accessible colors and text.

    Enroll

    Subscribe

    Not another fluffy newsletter. Get actionable tips, videos and strategies from Ann in your inbox.